How to Install
- Open the buckle on the back of the triggers. Put the Tablet/iPad in the triggers and then push the buckle back to its original position.
- Use the fixing nut to adjust the contact between the tablet screen and trigger conductive rubber as per your need.
- While charging: LED Status is Red.
- Charging Complete: LED Status is Green.
Note: Only the left side trigger requires charging.
Power ON & OFF
- Power ON- Long-press the power button on the left side trigger for 3 seconds to turn ON the power (Blue LED turns ON).
- Power OFF- Long-press the power button for 2 seconds to turn OFF the power (Blue LED turns OFF)
Mode Switching ( Single Fire ⇋ Burst Mode)
Press the Power/Gear Switch button to switch between single fire shooting mode and switch to burst mode (continuous firing)
Single Fire Mode: LED light is fixed blue.
Burst Mode: LED light is flashing/blinking blue.
Switch Gears in Burst Mode
In Burst mode hold down the trigger button+short press the power /gear button.
There are 4 gears -8/16/24/32 shots per second (the faster the flashing speed of blue LED, the higher the frequency of gear.